SL 258-2000 水库大坝安全评价导则
作者:标准资料网 时间:2024-05-10 02:39:38 浏览:8892
来源:标准资料网
基本信息
| 标准名称： | 水库大坝安全评价导则 |
| 英文名称： | Guidelines on dam safety evaluation |
| 中标分类： |
工程建设 >>
水利、水电工程 >>
水电工程 |
| 发布部门： | 中华人民共和国水利部 |
| 发布日期： | 2000-12-29 |
| 实施日期： | 2000-08-01 |
| 首发日期： | 1900-01-01 |
| 作废日期： | 1900-01-01 |
| 主管部门： | 水利部 |
| 起草单位： | 水利部大坝安全管理中心 |
| 起草人： | 王仁钟、李君纯、刘嘉舫等 |
| 出版社： | 中国水利水电出版社 |
| 出版日期： | 2000-08-01 |
| 页数： | 43页 |
适用范围
本导则适用于已建大、中型及特别重要小型水库的1, 2, 3级大坝。大坝包括永久性挡水建筑物以及与大坝安全有关的泄水、输水和过船建筑物及金属结构等。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 工程建设 水利 水电工程 水电工程
【英文标准名称】:Textiles-Determinationofcommercialmass-Part1:Determinationofdrymassbydessicationinhotair
【原文标准名称】:纺织品.商业公定重量测定.第1部分:热气流干燥后测定干重
【标准号】:DIN53800-1-2003
【标准状态】:现行
【国别】:德国
【发布日期】:2003-06
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:总重量;烘干质量;干燥损失;试验结果;定义;干燥;分配;重量测量;水的分布;纺织纤维;纺织材料;商业公定重量;商业公定重量测定;试验;试验证明书
【英文主题词】:testcertificates;grossweight;commercialmass;commercialmassdetermination;weightmeasurement;dryinglosses;testing;definitions;definition;drying;textiles;oven-drymass;distribution;testresults;wat
【摘要】:Thestandardspecifiesmethodsforthedeterminationofthecommercialmassoftextiles.
【中国标准分类号】:W04
【国际标准分类号】:59_080_30
【页数】:14P;A4
【正文语种】:德语
Product Code:SAE AS5900
Title:Standard Test Method for Aerodynamic Acceptance of SAE AMS 1424 and SAE AMS 1428 Aircraft Deicing/Anti-icing Fluids
Issuing Committee:G-12adf Aircraft Deicing Fluids
Scope: This SAE Aerospace Standard (AS) establishes the aerodynamic flow-off requirements for SAE AMS 1424 Type I and SAE AMS 1428 Type II, III and IV fluids used to deice and/or anti-ice aircraft:a. with takeoff rotation speeds exceeding approximately 100 knots, with time from brake release to rotation speed greater than 20 s, typical for large transport type jet aircraft. This procedure is referred to as the High Speed Ramp Test.and/orb. with takeoff rotation speeds exceeding approximately 60 knots, with time from brake release to rotation speed greater than 15 s typical for commuter type aircraft. This procedure is referred to as the Low Speed Ramp Test.NOTE: When compensating measures, such as increase in rotation speed, are used in the aircraft takeoff procedure, the High Speed Ramp can apply. The objective of this standard is to ensure acceptable aerodynamic characteristics of the deicing/anti-icing fluids as they flow off aircraft lifting and control surfaces during the takeoff ground acceleration and climb.NOTE: These test methods are based on glycol-based fluids, additional testing may be required for non-glycol-based fluids.
Rationale: This SAE Aerospace Standard (AS) establishes the aerodynamic flow-off requirements for SAE AMS 1424 Type I and SAE AMS 1428 Type II, III and IV fluids used to deice and/or anti-ice aircraft:a. with takeoff rotation speeds exceeding approximately 100 knots, with time from brake release to rotation speed greater than 20 s, typical for large transport type jet aircraft. This procedure is referred to as the High Speed Ramp Test.and/orb. with takeoff rotation speeds exceeding approximately 60 knots, with time from brake release to rotation speed greater than 15 s typical for commuter type aircraft. This procedure is referred to as the Low Speed Ramp Test.NOTE: When compensating measures, such as increase in rotation speed, are used in the aircraft takeoff procedure, the High Speed Ramp can apply. The objective of this standard is to ensure acceptable aerodynamic characteristics of the deicing/anti-icing fluids as they flow off aircraft lifting and control surfaces during the takeoff ground acceleration and climb.NOTE: These test methods are based on glycol-based fluids, additional testing may be required for non-glycol-based fluids.
