您的位置: 标准下载 » 国际标准 » BS 英国标准 »
热门标准
下载排行

BS DD 226-1996 承受无侧限动态载荷的沥青混合物耐永久变形的测定方法

作者:标准资料网 时间:2024-05-15 17:09:47  浏览:9269   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Methodfordeterminingresistancetopermanentdeformationofbituminousmixturessubjecttounconfineddynamicloading
【原文标准名称】:承受无侧限动态载荷的沥青混合物耐永久变形的测定方法
【标准号】:BSDD226-1996
【标准状态】:作废
【国别】:英国
【发布日期】:1996-01-15
【实施或试行日期】:1996-01-15
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:机械试验;报告;分类系统;试验设备;试样制备;沥青制品;试验条件;沥青;路面(道路);材料的机械性能;永久的;动态荷载;变形;尺寸
【英文主题词】:
【摘要】:
【中国标准分类号】:E43
【国际标准分类号】:75_140
【页数】:12P;A4
【正文语种】:英语


下载地址: 点击此处下载
返回跳至顶部
Product Code:SAE AMS5529
Title:Steel, Corrosion Resistant, Sheet and Strip, 17Cr - 7.1Ni - 1.1Al, Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.050 inch (0.038 to 1.27 mm) in nominal thickness.These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 °F (316 °C), but usage is not limited to such applications.Strength of these cold-worked products will be impaired if parts are welded during fabrication.ertain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.Product Code:SAE AMS5657
Title:Steel Bars and Forgings, Corrosion and Moderate Heat Resistant 15Cr - 7.1Ni - 2.5Mo - 1.1Al (NONCURRENT October 1982)
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:Primarily for parts requiring high strength and oxidation resistance up to 700 掳F, and where such parts may require welding during fabrication.